The appearance of PUMA ALL-PRO NITRO is quite outstanding. Especially it uses different density of PUMA NITRO™SQD FOAM insole technology in different position. Today let’s have a look at the inner structure of ALL-PRO NITRO by deconstructing it.
PUMA ALL-PRO NITRO
Separating the vamp and insole of right shoe
The green part is soft fabric. And the white position is added with TPU yarn, which not only ensures the excellent support for key force points, but also offer good air permeability.
The fine and closely mesh fabric inner sleeve matches with thick shoe-tongue.
The forepart uses half-dynamic lacing way.
The leather on the heelpiece extends to the outsole and cover the insole to reduce the deformation of insole and offer more stability.
From the side section, the heelpiece counter of ALL-PRO NITRO is a injected type, which fits the Achilles tendon and further elevates the fitness of heelpiece.
The range of heelpiece counter is big, which can fix the heel well.
The thickest position of EUR42.5 shoe heel is about 9.70mm.
It has PUMA logo on the heelpiece of fluorescent green shoe-pad.
The glue on the reverse side of shoe-pad can reduce sliding in the shoe.
The length of EUR42.5 shoe-pad is about 275mm.
The width of EUR42.5 half-sole shoe-pad is about 92.31mm.
The thickness of EUR42.5 shoe-pad is about 5.70mm.
The EVA material insole fabric
The reverse side of insole fabric is non-woven material which is printed with product information.
The brand-new PUMA NITRO™SQD FOAM insole technology
The midsole is densely covered with punching holes.
From this angle, we can see the structure of the partitioned density midsole. The outer layer is covered with a high-density NITRO material (the outer white area) to improve stability, and the softer NITRO material (the green area in the coating) is used in the center to improve the cushioning performance.
The TPU stabilizing plate is put between insole and outsole.
From this angle, we can see the position of TPU stabilizing plate and insole.
The length of EUR42.5 TPU stabilizing plate is about 112.35mm.
The width of EUR42.5 TPU stabilizing plate front end is about 52.89mm.
The width of EUR42.5 TPU stabilizing plate rear-end is about 31.55mm.
The thickness of EUR42.5 TPU stabilizing plate is about 2.78mm.
The thickness of the thickest position of EUR42.5 TPU stabilizing plate is about 4.90mm.
One-piece anti-skidding rubber outsole
The half-sole uses checkerboard crossed herringbone pattern which extends to the upturning position of inner side. The deep pattern improves the traction performance.
The front-end outsole has upturning design which improve the protection and stability.
The thickness of EUR42.5 half-sole rubber outsole is about 4.75mm.
The thickness of EUR42.5 heelpiece rubber outsole is about 4.84mm.
The thickness of EUR42.5 half-sole (insole+outsole) is about 17.01mm.
The thickness of EUR42.5 arch thickest position is about 22.22mm. The thickness of heelpiece outsole (insole+outsole) is about 24.79mm. The drop height is about 7.78mm.
Let’s compare the difference of the inner structure of PUMA ALL-PRO NITRO and CLYDE ALL-PRO. The size of PUMA ALL-PRO NITRO is EUR42.5, and the size of CLYDE ALL-PRO is EUR42.
PUMA ALL-PRO NITRO
PUMA CLYDE ALL-PRO
ALL-PRO N?L?: the vamp is made of woven material and leather.
ALL-PRO?R?: the vamp is made of MATRYX, it has multiple layers and carbon fiber.
ALL-PRO N?L?: The upper adds TPU yarn on different area to keep the supporting performance and improve the air permeability.
ALL-PRO?R?: the reverse side of vamp adds hot-melting coating which improve the overall supporting performance.
ALL-PRO N?L?: The mesh fabric inner sleeve matches with thick shoe-tongue.
ALL-PRO?R??it uses independent thick shoe-tongue
ALL-PRO N?L?& ALL-PRO?R?use the same shoe-pad.
ALL-PRO N?L?& ALL-PRO?R?: the reverse side of shoe-pad comparison
ALL-PRO N?L?: the thickness of EUR42.5 shoe-pad is about 5.70mm.
ALL-PRO?R?: the thickness of EUR42 shoe-pad is about 5.45mm.
ALL-PRO N?L?: the material of EVA insole fabric is loosened.
ALL-PRO?R?: the material of EVA insole fabric is more exquisite.
ALL-PRO N?L?& ALL-PRO?R?: the reverse side of insole fabric use non-woven material.
ALL-PRO N?L?uses PUMA NITRO™SQD FOAM insole technology. The outer layer uses high density NITRO material as the frame, and the inner side is filled with NITRO material.
ALL-PRO?R?uses PROFOAM and insole material as frame. The shoe heel uses independent PEBAX material.
ALL-PRO N?L?VS ALL-PRO?R?: the side section of insole comparison
ALL-PRO N?L?: the arch position has TPU stabilizing plate
ALL-PRO?R?: there is a piece of Y shape TPU stabilizing plate from the half-sole to arch.
ALL-PRO N?L?& ALL-PRO?R?: the outsole pattern comparison
ALL-PRO N (above): the width of EUR42.5 half-sole is about 114.18mm.
ALL-PRO (bottom): the width of EUR42.5 half-sole is about 108.07mm.
ALL-PRO N (L): the thickness of EUR42.5 half-sole rubber is about 4.75mm.
ALL-PRO?R?: the thickness of EUR42 half-sole rubber is about 4.88mm.
ALL-PRO N (L): the thickness of EUR42.5 shoe heel rubber is about 4.84mm.
ALL-PRO?R?: the thickness of EUR42 shoe heel rubber is about 3.64mm.
The thickness of EUR42.5 ALL-PRO NITRO half-sole (insole + outsole) is about 17.01mm. The thickness of shoe heel (insole + outsole) is about 24.79mm. The drop height is about 7.78mm.
The thickness of EUR42 ALL-PRO half-sole (insole + outsole) is about 15.91mm. The thickness of shoe heel (insole + outsole) is about 23.70mm. The drop height is about 7.79mm.
The unit weight of EUR42.5 ALL-PRO N(L) is about 386.80g.
The unit weight of EUR42 ALL-PRO (R) is about 355.70g.
The deconstructed parts of ALL-PRO N
The deconstructed parts of ALL-PRO
Deconstructed Report:
VAMP: the vamp is made of woven material and leather material. The texture is excellent. The green position is soft fabric, and the white position is added with TPU yarn to keep the excellent supporting performance and good air permeability. With the brand-new half dynamic lacing system, it offers excellent fitness.
Insole: PUMA NITRO™SQD FOAM insole technology improves the comfort level.
Insole: PUMA NITRO™SQD FOAM insole technology improves the comfort level. The inner layer uses big area of soft and resilient low-density insole (the green position) to cover the feet, and it has padding on the heelpiece position. The center of gravity is high, the drop height is about 7-8mm. It’s suitable for most of people.
Overall: The appearance of PUMA ALL-PRO NITRO is awesome. It’s suitable for most of people. The overall performance has been improved. It’s a pair of great basketball shoes.
